Instructions for use STD Test | Male
Please read this manual carefully and completely before taking your sample. Do not hesitate to contact us if you have any questions.
Activate your kit
Non-activated kits cannot be processed in the lab, so please follow the instructions below.
- Just before taking the sample, visit https://kits.abel.care/.
- Enter the barcode and verification code found on the activation card. You will find that card in the SOA care box. Once you have scanned the QR code, this step is complete.
- Follow all the steps as prompted on the website.
- While activating the kit, you can choose to have your report forwarded to your doctor.
Sampling
Urine test
Wait at least an hour after your last urination before starting the collection.
- Place all parts on a clean surface in front of you. Make sure paper towels are within reach.
- Wash your hands thoroughly before you start.
- Take the paper collection box out of your STD care box. Apply some pressure to fold it open.
- Pee into the cup until it is 2/3 full. Drain the first part of the urine into the cup and then finish in the toilet.
- Take the tube and pipette.
- Open the tube. Using the pipette, transfer urine from the cup into the tube. You will have to pipette 2 or 3 times.
- Fill the tubeĀ at least half. Do not fill above or below the marked lines, otherwise your sample will be rejected by the laboratory.
- Close the tube. Make sure you tighten the cap securely.
- Discard the remaining urine and throw away the collection cup.
Packaging and shipping of your samples
- Place the tubes in the Labo Maenhout bag that you will find in the STD care box and seal it tightly.
- Remove everything from your STD care box and place only the Labo Maenhout bag with the samples in the empty box. Close the box securely.
- You will find the return sticker among the items. Place the box containing the samples back in the original shipping bag, close the bag and attach the return sticker to the shipping bag.
- Go to the nearest bpost (Belgium) / DHL (Netherlands) / LaPoste (France) letterbox and deliver the parcel there. (Parcel is already pre-addressed and pre-paid).
- Within 2 to 3 working days you will receive an e-mail from us (check your junk mail) that you can view your result online at https://kits.abel.care/results.
! ! ! Make sure you drop the parcel in the mailbox on the day you take the test. This date must correspond to the date entered when you activated your parcelĀ ! ! !